Tooling for EDM

3R-400.24-11

For mounting on machine spindle.

3R-410.31-5

Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.

90356.21

Chuck adapter with built-in pneumatic MacroCombi chuck for mounting in 3R-770-1A or 3R-770-5A.

3R-446.11

For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.

3R-466.4033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.

3R-466.4033-S

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.10033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.15033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-406.9

For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.

3R-410.1-M

For mounting on the machine spindle or in a fixture on the machine table.

3R-460.34

For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.

3R-460.32

For mounting on a lathe taper.