Tooling for EDM

3R-690.1-185

Chuck for permanent mounting on the machine table or into a PM press.

3R-690.1-142

Chuck for permanent mounting on the machine table or into a PM press.

3R-690.1-110

Chuck for permanent mounting on the machine table or into a PM press.

3R-400.24-11

For mounting on machine spindle.

3R-410.31-5

Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-936-85.40

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-770-1

Pneumatic table chuck.

3R-770.19-1

Pneumatic table chuck with 3Refix holes.

3R-770-1A

Pneumatic table chuck with extra connections for automatic chuck adapters, With fixing lugs.

3R-770-5A

Pneumatic table chuck with extra connections for automatic chuck adapters. Without fixing lugs